2024-07-02 20:28:47
FIA Release 2026 Formula 1 PU rules a tech regs update – Daily Sporting News
Home F1 FIA Release 2026 Formula 1 PU rules a tech regs update

FIA Release 2026 Formula 1 PU rules a tech regs update

0
FIA Release 2026 Formula 1 PU rules a tech regs update

FIA Release 2026 Formula 1 PU rules a tech regs update

Here is the full transcript of the FIA World Motor Sport Council approval of the Formula 1 2026 Power Unit Regulations and updated 2022-2023 Technical Regulations.

A quick analysis of the rules for Formula 1 in 2026 indicates the following:

  • No new fossil carbon will be burned
  • Three times the electrical power in the package
  • 1,000+ horsepower with less fuel used
  • Improved safety
  • Lower costs but not at the expense of innovation
  • The cars will be a tougher challenge for drivers
  • The sport becomes more environmentally responsible
  • F1 onstructors will remain limited to using three power units per car, per season.

Reuters reports that the new power unit will retain the high-revving 1.6 litre V6s but have significantly increased electrical power and use 100% sustainable fuels.

The current Motor Generator Unit Heat (MGU-H) element will be removed, reportedly a pre-requisite for the Volkswagen Group brands to come in.

“The regulations are intended to make it possible and attractive for newcomers to join the sport at a competitive level,” the FIA said.

It added they were the result of a “collaborative consultation between the FIA and both incumbent and potential new PU (power unit) manufacturers.”

Media reports have indicated Porsche is planning to take a 50% stake in Red Bull Technology, the company which builds cars for the current championship leaders. read more

Red Bull team boss Christian Horner told reporters at last month’s Hungarian Grand Prix there was ‘constructive discussion’ with Porsche but still plenty of caveats and hurdles to overcome.

“The first actual hurdle for any new manufacturer coming in is those technical regulations for the power unit from 2026 onwards,” he said.

Audi have been linked to Sauber, the Swiss-based company that runs the Alfa Romeo team.

The WMSC also approved changes to roll hoops

The tweak comes as consequence of Chinese driver Guanyu Zhou’s big crash at Silverstone, and measures to reduce aerodynamic ‘porpoising’. read more

FIA president Mohammed Ben Sulayem said significant time and resources had gone into analysing and resolving the problem of vertical oscillation with the new generation of cars introduced this year.

“The FIA has a duty to act and ensure that the drivers are not put at undue risk of injury as a result of this phenomenon,” he added.

The FIA will be measuring the phenomenon from the Belgian Grand Prix at the end of August.

In 2023 floor edges will be raised by 15mm, a compromise agreed by teams after the FIA initially proposed raising them by 25mm.

Some teams, such as Ferrari and Red Bull, do not have a problem with porpoising and argued the initial proposals favoured those who got this year wrong. read more

The FIA said a key finding from the Silverstone crash was that the pointed top of the Alfa’s roll hoop ripped off after digging into the asphalt when the car flipped. read more. A rounded top will now be required.

Full Transcript released today by the FIA

1. World Motor Sport Council Approves 2026 Formula 1 Power Unit

Power Unit Technical, Sporting and Financial Regulations confirmed. The FIA World Motor Sport Council has today, 16 August, approved the regulations for the 2026 Formula 1 Power Unit (PU) Regulations that will apply to the PUs to be developed and utilised from the 2026 season of the FIA Formula One World Championship.

These regulations are the result of extensive research and development by the FIA, as well as collaborative consultation between the FIA and both incumbent and potential new PU manufacturers. The package includes Technical, Sporting and Financial Regulations.

The 2026 PU Regulations underline the FIA’s ongoing commitment to innovation and sustainability and come at a time of significant growth for Formula 1.

FIA President Mohammed Ben Sulayem, said: “The FIA continues to push forward on innovation and sustainability – across our entire motor sport portfolio – the 2026 Formula 1 Power Unit Regulations are the most high-profile example of that mission.

“The introduction of advanced PU technology along with synthetic sustainable fuels aligns with our objective of delivering benefits for road car users and meeting our objective of net zero carbon by 2030. Formula 1 is currently enjoying immense growth and we are confident these Regulations will build on the excitement our 2022 changes have produced.

“I want to thank all of the FIA management and technical staff involved in this process for their diligence and commitment in working together with all of our Formula 1 stakeholders to deliver this. I also want to thank our WMSC members for their consideration and approval of these regulations.”

The four key pillars of the 2026 framework are:

  • Maintaining the spectacle – the 2026 Power Unit will have similar performance to the current designs, utilising high-power, high-revving V6 internal combustion engines and avoiding excessive performance differentiation to allow for improved raceability.
  • Environmental sustainability – the 2026 Power Unit will include an increase in the deployment of electrical power to up to 50% and utilise a 100% sustainable fuel.
  • Financial Sustainability – Financial Regulations regarding the Power Units will reduce the overall costs for competitors whilst retaining the cutting-edge technological showcase that is at the core of Formula 1.
  • Attractive to new Power Unit Manufacturers – the regulations are intended to make it possible and attractive for newcomers to join the sport at a competitive level.

A detailed overview of the key elements of each section of the Power Unit Regulations can be found here.

formula 1 porpoise f1 ferrari gif

2. World Motor Sport Council approves changes to the 2022 and 2023 F1 Technical Regulations to address the matter of porpoising and introduce greater safety standards for the roll hoop

Key changes approved to address safety matters

The World Motor Sport Council has approved several changes to the 2022 and 2023 Formula 1 Technical Regulations to address two key safety concerns – the phenomenon of vertical oscillations (“aerodynamic porpoising”), and the safety standards for the roll hoops of Formula 1 cars.

FIA President Mohammed Ben Sulayem said: “Safety is absolutely the highest priority for the FIA, and we have devoted significant time and resources to the analysis and resolution of the issue of porpoising.

“I have personally discussed this matter with all of the teams and drivers, and while of course there are some differences in opinion owing to varying competitive positions, it is very clear that the FIA has a duty to act and ensure that the drivers are not put at undue risk of injury as a result of this phenomenon.

“It was evident that an update to the requirements for the roll hoops was needed after the crash of Zhou Guanyu at Silverstone, and while this incident showed us all how remarkable the safety systems in Formula 1 are, it also proved once again that we must continue to innovate and pursue safety matters without compromise.”

The following is a summary of these two issues and the associated regulatory updates to address them:

The phenomenon of vertical oscillations (“aerodynamic porpoising”), combined with low ride heights and minimal rake have been a noted characteristic of the new generation of Formula 1 cars, introduced in 2022, and has been discussed several times in the Technical Advisory Committee meetings. The appearance of this phenomenon raised concerns about safety and the health and wellbeing of the drivers.

While the effect of this phenomenon has been less pronounced on some recent circuits, the FIA believes that its occurrence, and the associated safety issues, will remain and potentially become even worse in the future.

The FIA has consulted extensively with the teams and has come to a final position as follows:

From the Belgian Grand Prix, the FIA will be measuring the phenomenon and expecting teams to operate below a certain threshold in order for their car to be considered safe. In addition, the following measures are approved for 2022 and 2023:

2022 Formula 1 Technical Regulations * Central Floor Flexibility – changes to re-define the stiffness requirements of plank and skids around the thickness measurement holes.
2023 Formula 1 Technical Regulations * The floor edges will be raised by 15mm.

  • The Diffuser throat height will be raised, while care has been taken to avoid any impact on the teams’ designs of the mechanical components.
  • The diffuser edge stiffness will be increased.
  • An additional sensor will be mandated to monitor the phenomenon more effectively.

After the serious accident at the start of the 2022 FIA Formula 1 British Grand Prix, a detailed analysis has been conducted on a number of issues, from the start of the accident to the final rescue operation and vehicle recovery, as is normal for any serious accident.

One item that was highlighted was the performance of the roll hoop, which came off the chassis during the accident. The key findings were: * That the pointed top of the roll hoop dug into the tarmac, which contributed to the high horizontal force which led to it breaking off.

  • That the wording, as currently in the regulations, allows teams to homologate their roll hoops with forces acting through a lower point than intended. This can lead to the roll hoop resisting forces that are lower than originally intended by the regulations.
  • That a significant increase in roll hoop strength should be implemented in Formula 1.

These matters were extensively discussed in three Technical Advisory Committee meetings specifically called to analyse the issue.

Following a review of the above information, the World Council approved these changes to the 2023 Formula 1 Technical Regulations:

  • A change to require a rounded top of the roll hoop, which will reduce the chance of it digging into the ground during an accident.
  • A change to ensure a minimum height for the point of application of the homologation test.
  • Creation of a new physical homologation test where the load pushes the roll hoop in the forward direction.
  • Definition of new tests to be carried out by calculation.

As a medium-term objective, for 2024, the intention is to proceed to a significant overhaul of the roll hoop tests to ensure that cars in the future resist significantly more severe loads.

The World Motor Sport Council, headed by the FIA President, and supported by the FIA Deputy President for Sport, is comprised of 27 members representing 24 countries around the world. The WMSC has responsibility for all aspects of international motor sport from karting to Formula 1, in the areas of rules, regulations, safety and development.

The WMSC represents the interests of motor sport club members in 146 countries. The WMSC prioritises improvements in safety and environmental standards across all forms of the sport, adopts common regulations across the various series, and nurtures motor sport’s roots particularly in developing countries.

hentai.comic hentaitop.org blue drop tenshi no bokura صور طياز بلدي tubecategories.net تحميل سكس مصرى indian bedroom sex tubeblackporn.com best indian porn site m.xhemster dungtube.info chote bacho ka sex video devika mall anybunny.mobi salma hayek nude scenes la luna sangre full episode online free teleseryeonline.com kapuso mo, jessica soho season 2 episode 1 xxx india porncorntube.net danush image hindi p0rn porno-zona.com tamil kamaveri ww sax video com themovs.info anthi malai song sex moves in india greatxxxtube.com alahotube telugu sex videos xvideos tubereserve.mobi xxx com bangla indian hairy pussy sex xxxbunker.mobi xnxx rape hindi shirai kuroko hentai hentaicredo.com bakkon memorial 3 rat porn pornodoza.org doodhwali doodhwali tube galore videoxlist.mobi mallu aunty pussy